Product Description

Titan Centering Microscope x Series

The Titan Centering Microscopes are designed for job set-up and inspection with vertical milling machines, large jig borers, boring mills, lathes, electrical discharge machines, tape-controlled machines, drill presses. Three Coordinate Measuring Machines.

Titan Centering Microscopes have an upright image, optically correct from left to right so that the operator sees the workpiece with the microscope the same as without it, mistakes due to transposing or converting are eliminated.

The x Series Centering Microscopes all come with hardened and ground 1/2" diameter shanks so that they are adaptable to all machines through the use of collets. It is suggested if it will be used continuously in one machine that it be fitted with its own collets.

The most minute spindle run-out can be compensated for x Series Centering Microscopes. The X Series Centering Microscope uses the (3) master centering screw method where the reticle floats between the screws just below the eyepiece. Special instructions come with the unit. It is an easy matter to adjust the microscope for perfect centering every time.