The MDD2 Series Micro-Digit Micrometer Head is an Electronic LCD Display Direct Reading Stage Micrometer Heads with all functions in the head itself. The Scales are ideally suited for use on Measuring-Toolmakers Microscopes, Profile Projectors-Optical Comparators, Special Fixtures, Gauges and Tools. It is light in weight and easy to use. Rapid readability in each axis while using the microscope. They are available MDD2-50 with a 2.00" range.
Operates on 110V A.C. Only with a step down transformer.
Advantages of MDD-2 Series Micrometer Head
MDD2-50 One micrometer head only, with one A.C. adapter comes complete with a plastic storage case.
Instant Inch-Metric Conversion.
Operates directly from main power supply or from Ni-Cad batteries.
Memory and Recall Memory (Continuous Memory).
Go-NoGo Tolerance Settings.
Zero Setting at any point.
Automatic Switch Off after 4 minutes of inactivity with automatic recall of last digit when On Button is pressed.
If improperly used - error signal is flashed.
Hold button to lock in last reading.
Easy reading Large .250" LCD Display.
Micrometer head can be read in the forward or reverse direction.
Easy standard .500" mounting diameter for all stages.
Readings can be had in a continuous basis in both millimeters and inches as the conversion capability allows both simultaneously (Logic Conversion).
Many functions found in Micrometer Head proper which are usually found in more expensive units with separate displays.
Special indicators to show when extra functions such as memory are in use.
Measuring Range: MDD2-50 0-2" or 0-50mm
Resolution: .00005" or .001mm (1 micron)
Accuracy: MDD2-50 ± 2.5 microns ± .000089"
Repeatability: ± 1 Digit
Power Supply: directly off 110V power supply with A.C. Adapters 1.2V
Weight: MDD2-25 11 ounces MDD2-50 15 ounces
Large LCD Display: .250"